|
| एमओक्यू: | 1 पीसी |
| कीमत: | बातचीत योग्य |
| मानक पैकेजिंग: | कार्टून |
| वितरण अवधि: | 7-10 कार्य दिवस |
| भुगतान विधि: | टी/टी, वेस्टर्न यूनियन, |
| आपूर्ति क्षमता: | 50000 पीसीएस / महीना |
Export Dept: HAILIAN PACKAGING EQUIPMENT CO., LTD
Branch: Sichuan Gene Haven Animal Husbandry Technology Co,Ltd
EMAIL: nancyzxd68@gmail.com
Freeze Fine Tube Cutter is a tool used for cutting freeze fine tubes
Freezing fine tube scissors are mainly used in the artificial insemination process of livestock, especially when employing fine tube freezing
technology. Fine tube freezing of semen is a method of preserving semen in small plastic tubes for easy transportation and storage. When
performing artificial insemination, it is necessary to cut open the frozen fine tube to quickly thaw the semen inside and inject it into the
female livestock. The design of the frozen fine tube scissors usually considers operational convenience and efficiency to ensure quick
cutting actions while avoiding unnecessary damage to the semen.
This fine tube cutter can be used for the following two types of thin tubes:
Model: HL - FS - TT 0.25ml
Item Type: Frozen Semen Tube
Material: PVC
Application: Freeze semen
Capacity: 0.25ml
Length:133mm
OD: 1.92~1.96mm
ID: 1.6~1.64mm
Quantity: 1000PCS
Model: HL - FS - TT 0.5ml
Item Type: Frozen Semen Tube
Material: PVC
Application: Freeze semen
Capacity: 0.5ml
Length:133mm
OD: 2.87~2.91mm
ID: 2.5~2.54mm
Quantity: 500PCS
Freezing Fine Tube Cutter Operation Steps:
Pull back the push rod of the insemination gun, insert the thin tube, and cut off the sealing part of the thin tube.
Remove the thin tube from the liquid nitrogen tank and immediately place it in 38°C warm water. When placing the thin tube, the cotton
plug end of the tube should face downwards, with the sealing end facing upwards, and the seal should be exposed to water. Wait until the
color inside the tube changes (at this time, the temperature inside the tube is approximately around 4 degrees Celsius, and it usually takes
about 10 to 15 seconds), then quickly move the tube to 4-degree cold water (the seal still exposes water) and maintain this temperature
until insemination.
In addition, the blade is hidden inside the scissors, preventing scratches during use. The scissors are compact and very convenient to
carry; they can be attached to a key for easy portability.
After cutting the frozen fine tube, put on the insemination outer sleeve, remove the plastic seal, and tighten the outer sleeve downwards
for locking.
After insemination, the plastic tubing is generally discarded.
|
|
| एमओक्यू: | 1 पीसी |
| कीमत: | बातचीत योग्य |
| मानक पैकेजिंग: | कार्टून |
| वितरण अवधि: | 7-10 कार्य दिवस |
| भुगतान विधि: | टी/टी, वेस्टर्न यूनियन, |
| आपूर्ति क्षमता: | 50000 पीसीएस / महीना |
Export Dept: HAILIAN PACKAGING EQUIPMENT CO., LTD
Branch: Sichuan Gene Haven Animal Husbandry Technology Co,Ltd
EMAIL: nancyzxd68@gmail.com
Freeze Fine Tube Cutter is a tool used for cutting freeze fine tubes
Freezing fine tube scissors are mainly used in the artificial insemination process of livestock, especially when employing fine tube freezing
technology. Fine tube freezing of semen is a method of preserving semen in small plastic tubes for easy transportation and storage. When
performing artificial insemination, it is necessary to cut open the frozen fine tube to quickly thaw the semen inside and inject it into the
female livestock. The design of the frozen fine tube scissors usually considers operational convenience and efficiency to ensure quick
cutting actions while avoiding unnecessary damage to the semen.
This fine tube cutter can be used for the following two types of thin tubes:
Model: HL - FS - TT 0.25ml
Item Type: Frozen Semen Tube
Material: PVC
Application: Freeze semen
Capacity: 0.25ml
Length:133mm
OD: 1.92~1.96mm
ID: 1.6~1.64mm
Quantity: 1000PCS
Model: HL - FS - TT 0.5ml
Item Type: Frozen Semen Tube
Material: PVC
Application: Freeze semen
Capacity: 0.5ml
Length:133mm
OD: 2.87~2.91mm
ID: 2.5~2.54mm
Quantity: 500PCS
Freezing Fine Tube Cutter Operation Steps:
Pull back the push rod of the insemination gun, insert the thin tube, and cut off the sealing part of the thin tube.
Remove the thin tube from the liquid nitrogen tank and immediately place it in 38°C warm water. When placing the thin tube, the cotton
plug end of the tube should face downwards, with the sealing end facing upwards, and the seal should be exposed to water. Wait until the
color inside the tube changes (at this time, the temperature inside the tube is approximately around 4 degrees Celsius, and it usually takes
about 10 to 15 seconds), then quickly move the tube to 4-degree cold water (the seal still exposes water) and maintain this temperature
until insemination.
In addition, the blade is hidden inside the scissors, preventing scratches during use. The scissors are compact and very convenient to
carry; they can be attached to a key for easy portability.
After cutting the frozen fine tube, put on the insemination outer sleeve, remove the plastic seal, and tighten the outer sleeve downwards
for locking.
After insemination, the plastic tubing is generally discarded.
